Description
General
| IC-F5330D | IC-F6330D | ||
|---|---|---|---|
| Frequency coverage | 136–174 MHz | 400–520 MHz 400–512 MHz |
|
| Number of channels | 128 channels/8 zones | ||
| Type of emission | USA 50 W/45 W | 11K0F3E (15 kHz)/4K00F1E, F1D (7.5 kHz) | 11K0F3E (12.5 kHz)/4K00F1E, F1D (6.25 kHz) |
| EXP 50 W/45 W | 16K0F3E (25 kHz)/14K0F3E (20 kHz)/8K50F3E (12.5 kHz)/4K00F1E, F1D (6.25 kHz) | ||
| EXP 25 W | 16K0F3E (25 kHz)/14K0F3E (20 kHz)/8K50F3E (12.5 kHz)/4K00F1E, F1D (6.25 kHz) | ||
| Power supply requirement | USA, EXP 50 W/45 W | 13.6 V DC nominal | |
| EXP 25 W | 13.2 V DC nominal | ||
| Current drain (approx.) | Tx (High) | 14 A Max. (50 W/45 W) 7 A Max. (25 W) |
|
| Rx (Max./Standby) | 2.5 A Max./500 mA Max. | ||
| Antenna impedance | USA, EXP 50 W/45 W | 50 Ω (SO-239) | |
| EXP 25 W | 50 Ω (BNC) | ||
| Operating temperature range | –30 °C to +60 °C, –22 °F to +140 °F | ||
| Dimensions (W×H×D) (Projections not included) |
Main unit: 150 × 45 × 161.8 mm, 5.9 × 1.8 × 6.4 in Mic: 60.8 × 134.8 × 35.5 mm, 2.4 × 5.3 × 1.4 in |
||
| Weight (approx.) | Main unit: 1.2 kg, 2.4 lb Mic: 250 g, 8.8 oz |
||
* 25 kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.
Transmitter
| IC-F5330D | IC-F6330D | ||
|---|---|---|---|
| Output power (rated) | USA, EXP 50 W/45 W | 50 W, 25 W, 5 W (Hi, L2, L1) | 45 W, 25 W, 4.5 W (Hi, L2, L1) |
| EXP 25 W | 25 W, 10 W, 5.8 W (Hi, L2, L1) | 25 W, 10 W, 5.8 W (Hi, L2, L1) | |
| Frequency stability | ±1.0ppm | ||
| Maximum frequency deviation | ± 5.0 kHz (W), ±4.0 kHz (M), ±2.5 kHz (N) | ||
| Spurious emissions | USA, EXP 50 W/45 W | 80 dB typ. | |
| EXP 25 W | 0.08 μW (typ.) (≤ 1 GHz)
0.03 μW (typ.) (> 1 GHz) |
||
| Audio harmonic distortion (AF 1 kHz 40% deviation) | 0.6% typ. | ||
| FM Hum and Noise (without CCITT filter) | 80/70 dB typ. (W/N) | 76/70 dB typ. (W/N) | |
| FSK error | 1.4% typ. | ||
Receiver
| IC-F5330D | IC-F6330D | ||
|---|---|---|---|
| Sensitivity | Analog 12 dB SINAD (USA, EXP 50/45 W) |
0.25/0.22 μV (–119/–120 dBm) typ. (W/N) | 0.22 μV (–120 dBm) typ. (W/N) |
| Analog 20 dB SINAD (EXP 25 W) |
–4.9/–4.5/–1.4 dBμV emf typ. (W/M/N) | –5.0/–5.0/–2.0 dBμV emf typ. (W/M/N) | |
| Digital 1% BER | –4.0 dBμV emf typ. | –5.0 dBμV emf typ. | |
| Adjacent channel selectivity | USA, EXP 50 W/45 W | 83/58/73 dB typ. (W/N/D) | 76/58/69 dB typ. (W/N/D) |
| EXP 25 W | 83/83/79/73 dB typ. (W/M/N/D) | 76/76/74/69 dB typ. (W/M/N/D) | |
| Spurious response rejection | 80 dB typ. | 75 dB typ. | |
| Intermodulation rejection | Analog (USA, EXP 50/45 W) (EXP 25 W) |
76 dB typ. 69 dB typ. |
74 dB typ. 69 dB typ. |
| Digital | 74 dBμV emf typ. | 74 dBμV emf typ. | |
| Hum and noise | 60/52 dB typ. (W/N) | 55/52 dB typ. (W/N) | |
| AF output power | Internal SP (Commandmic™) |
1.7 W typ. (at 5% distortion, 8 Ω load) | |
| External SP | 4.2 W typ. (at 5% distortion, 4 Ω load) | ||
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Humidity | 507.5 | II |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL STD 810 -C, -D, -E and -F.
All stated specifications are subject to change without notice or obligation.
| Ingress Protection Standard | |
|---|---|
| Water Resistance for Commandmic™ | IPX4 (Water resistance) |
Reviews
There are no reviews yet.